UNIDENTIFIED

FIDC CARD (VER. 2)

Data Bus                16-bit ISA
Card Size               Full height, half length
Hard Drives Supported   Two IDE(AT) devices
Floppy Drives Supported Unidentified

[Image]

                                CONNECTIONS

         Function             Label           Function            Label

  40-pin IDE(AT) connector     J1       4-pin drive active         J3
                                        LED

  34-pin cable connector -     J2
  floppy drive

                        USER CONFIGURABLE SETTINGS

                 Setting                    Label          Position

  »   Factory configured - do not alter      JP1         Unidentified

  »   Factory configured - do not alter      JP2         Unidentified

  »   IDE address is 1F0h                    JP3       Pins 2 & 3 closed

      IDE address is 170h                    JP3       Pins 1 & 2 closed

  »   Floppy address is 3F0h                 JP4       Pins 2 & 3 closed

      Floppy address is 370h                 JP4       Pins 1 & 2 closed

  »   IRQ14 not buffered                     JP5       Pins 1 & 2 closed

      IRQ14 buffered                         JP5       Pins 2 & 3 closed

  »   Floppy drive speed is 360rpm           JP6       Pins 2 & 3 closed

      Floppy drive speed is 300rpm           JP6       Pins 1 & 2 closed